MI2124 Earth Tester


Contact Us
About Us
One Stop PAT Shop
About Metrel
PAT Accessories
AS-NZS3760 UPDATE
Products
Educational Aids
About MTi
Bargain Bin

MI2124 Earth Tester

Home

Home
Contact Us
About Us
One Stop PAT Shop
About Metrel
PAT Accessories
AS-NZS3760 UPDATE
Products
Educational Aids
About MTi
Bargain Bin

MI2124 Earth Tester

Home

Home
Contact Us
About Us
One Stop PAT Shop
About Metrel
PAT Accessories
AS-NZS3760 UPDATE
Products
Educational Aids
About MTi
Bargain Bin

MI2124 Earth Tester

Home

MI2124 Earth Tester

Home

MI2124 Earth Tester

Home
Contact Us
About Us
One Stop PAT Shop
About Metrel
PAT Accessories
AS-NZS3760 UPDATE
Products
Educational Aids
About MTi
Bargain Bin

MI2124 Earth Tester

Home
Contact Us
About Us
One Stop PAT Shop
About Metrel
PAT Accessories
AS-NZS3760 UPDATE
Products
Educational Aids
About MTi
Bargain Bin

Earth

Earth resistance measurementMI2124
- 2-pole, 3-pole, 4-pole earth resistance measurements
- Selective earth resistance measurement with clamp (no influence from parallel earths; no opening of rust junctions is needed).
- Two clamp earth measurement for quick testing in urban areas (no opening of rusty junctions).
Specific earth resistance (p) measurement
True RMS current measurement for determining problems on earth systems and conductors.
-Outstanding features even in presence of mains interference and high probe resistance.
- Warnings indication for out of limits results and incorrect test conditions.
- 1000 memory locations and PC Software for print-out of measurement protocol.
- Socket for external battery charger.
- Auto power-off.

Technical Specification
Earth Resistance (four lead method)
Display range 0.1 19.99 kΩ
Resolution 0.01, 0.1, 1, 10Ω
Basic accuracy (2 % + 3 D).... (0 2kΩ)
Test voltage <40 V/ 125 Hz/sine wave
Short-circuit test current  <20 mA
High noise rejection yes
Aut potential and current probe res. test yes
Earth Resistance (tour-lead method + clamp) A 1018
Display range 0 1 1.99 kΩ
Other characteristics see under four-lead method
Earth Resistance (two test clamps) A 1018, A 1019
Display range  0 1 19.99 Ω 20.0 100.0 Ω
Basic accuracy (10 % + 2 D)  (20 %)
Specific Earth Resistance Standard Set Order No. MI 2124
Display range 01999 kΩ m (kΩ ft) - Instrument
Calculation p =2p aRE - Test lead 4.5 m, (black)
Distance between test rods  1 30 m (1 90 ft) - Test lead 4.5 m (green)
Other characteristics see under four-lead method - Test lead 15 m (red)
Current (True RMS) A 1018, A 1019 - Earth test rod, 4 pcs
Measurement principle current clamp 1 A / 1 mA - Instruction manual
Display range  0  200 A - Declaration of conformity
 Resolution 0. 1; 1 mA; 0.01; 0.1; 1 A - Production verification data
 Basic accuracy (5 % + 5 D) (0.5mA 200 A) - Declaration of warranty
Nominal frequency  50/60 Hz
General Characteristics
Power supply 6 V (4 V 1.5 V IEC  LR14)
Memories 1000 measurements
Degree of protection  IP 54  
Protection Classification double insulation  
Computer connection  RS 232
Overvoltage category  CAT 111/300 V CAT 11/600 V
Dimensions (w x h x l) 156 x 100 x 190 mm
Mass  ca 1.2 kg

Windows Downloading Software "Smart Link"

* The memories of SMARTEC testers can store approximately 1000 measurement values

* Transfer of measurement values via RS 232 serial port to a PC

* Print-out of tabular display used as a measuring report

* Runs on Windows 9519812000/NT/XP

 

 

Simple operation with only one selection switch and large start button

 
Large custom designed display offers warning indication of incorrect or out of limit results
    New modem compact design with protective plastic cover. Meets high degree of protection IP 54 and pollution degree 2. Small size and easy to carry
 

OPTIONAL ACCESSORIES

Order No.:
A 1111 Three phase adapter
A 1020 Soft carrying bag - small
A 1007 Carrying strap
A 1026 Test lead 20 m. red
A 1011 Universal test cable. 3 x 1.5m
A 1055 Universal test cable, 2 x 1. 5 m
A 1016 Test tip, red
A 1015 Test tip, blue
A 1014 Test tip , black
A 1013 Alligator clip (black)
A 1064 Alligator clip (red)
A 1045 Fast battery charger
(230 VAC and/or 12 V DC) with
a set of 4 NiCd batteries
A 1050 Windows Software "Smart Link
with RS 232 interface cable